Notes:

1. Every product is designed for using the inside diameter of the hose.
2.Valve is loosely assembled. Insure all connections are tight after determining handle orientation and before final installation
3.  Valve must be grounded to prevent galvanic corrosion.

4. See installation instructions further explanation of these notes.

Part Number SV 125 w SH 111

$172 + $24 shipping  


Single valve Substitutes raw water pickup valve. Marine generator and A/C winterizing and flush valve assembly kit. Constructed with bronze body and stainless steel ball valve and handle to fit your 1-1/4" cooling systems hose size.



INCLUDES:    Stainless steel strainer with reinforced oil resistant hose for winterizing and emergency bilge pumping. (SH 111)

Type your paragraph here.

Caution
If your water pump is installed in the stern drive, do not run the engine during flushing. You will damage the impeller

Notes:

1. Every product is designed for using the inside diameter of the hose.
2.Valve is loosely assembled. Insure all connections are tight after determining handle orientation and before final installation
3.  Valve must be grounded to prevent galvanic corrosion.

4. See installation instructions further explanation of these notes.

1-1/4" Cooling Systems Single Valve Left and Right

Part number SV 125

$158.00  +  $24 shipping

Single valve substitutes raw water pickup valve. Marine generator and A/C winterizing and flush valve assembly kit. Constructed with bronze body and stainless steel ball valve and handle to fit your 1-1/4" cooling systems hose size.



OPTIONAL:    Stainless steel strainer with reinforced oil resistant hose for winterizing and emergency bilge pumping. (SH 111)

Caution
If your water pump is installed in the stern drive, do not run the engine during flushing. You will damage the impeller